Best for mugs as well as straight tumblers up to 30oz.
- With the heat press unlocked and plugged in, turn on the switch located on the side.
- Press OK use the arrows to switch between C and F.
- Press OK to set the desired temperature as labelled 'SV'. Use the arrow keys to raise or lower the desired temperature.
- Press OK to set the time. This will be labelled "SV on the right. Use arrow keys to set the desired time.
- Press OK to enter real time mode. Note that "PV" is short for present value.
- The counter on the bottom right shows the number of transfer cycles. It ranges from 0 - 999. Press reset for 5 seconds to make the counter to go to 0.